04-05-2011, 08:03 PM | #1 |
S4 - Getting the hang of it
Join Date: Dec 2010
Posts: 133
Casino cash: $2878 |
roll cage, questions
thinking to remove rear seat, change front for recaros (just to have a chance to have 5 point harness as stock have no holes) and install 4 or 5 point harness. Is there a cage which i can mount and dismount without any big changes? I mean If i ever want to make the car 100% back stock to have that chance...
i mean not full cage, just back thank you |
04-05-2011, 08:31 PM | #2 |
Driving it like I nicked it
Join Date: Sep 2008
Posts: 2,099
Casino cash: $13060 |
Wiechers-Sport do one that is specifically designed to avoid the CSL Carbon panels in the rear.
__________________
Nathan |
04-05-2011, 09:01 PM | #3 |
S4 - Getting the hang of it
Join Date: Feb 2009
Location: Belgium
Posts: 176
Casino cash: $9921 |
I have the Wiechers one .
You always have to drill holes in the car to mount the cage .
__________________
'04 996 GT3 MK2 CS '03 CSL '12 Megane RS265 |
05-05-2011, 10:55 AM | #4 | |
CSL Register Uber-poster!
|
Quote:
posted a couple pics showing harness and seat runners for Recaros...cos im like that !
__________________
" I use Gleaming Kleen.... for that new car look " I wish I had used - Race Data Systems - Motorsport Data Loggers forgive me Nathan ! |
|
05-05-2011, 06:10 PM | #5 |
S4 - Getting the hang of it
Join Date: Nov 2009
Location: West Sussex
Posts: 155
Casino cash: $5680 |
I've got the Safety Devices full cage, and I fitted the rear only SD cage to Titans car. The rear cage would be reasonably easy to reverse, and all holes would cover up as long as you don't cut your rear carpet about to fit it back in nicely.
|
10-05-2011, 05:55 PM | #6 |
S6, Sport On, Traction Off
Join Date: Nov 2008
Location: Sussex
Posts: 1,912
Casino cash: $10231 |
Installing a rear cage alone obviously requires either welding or bolting.
Both being fairly permanent until either the welded option is cut & ground off or bolted option unbolted & plugged up. Bolting I recommend drilling a minimum of 3 holes/ bolts per 2x floor legs and Weicher I believe supply a 2mm plate when bolting but would prefer a 3mm-6mm plate to be used. Carpet would need to be cut for 2x legs on rear cage only or obviously removed. Alternatively if/ when reverting back to standard buy a new one. Last edited by karbonkid; 10-05-2011 at 06:36 PM. Reason: Edit |
|
|