Back soon on M power.

[Eduardo]

Originally Posted by Neil M

It's looking good from where I'm sat (Stockport)
Do you have a set of CSLegister Trackday plates? http://www.cslregister.com/forum/showthread.php?t=4783&highlight=track+plates
Just needs its 'M' graphics and you in business. Don't know yet, if I can add my support at Oulton. Best of luck Eduardo.

Thanks, awaiting for M graphics to arrive

Will be a slow one at Oulton if frozen track. Can't wait for March thought.

Eduardo.

[Levente]

this z4 could be practical for women too, like using the spoiler for ironing

[Neil M]

Originally Posted by Eduardo

Thanks, awaiting for M graphics to arrive

Will be a slow one at Oulton if frozen track. Can't wait for March thought.

Eduardo.

Do you want a Rally style sticker like the attached; with your username, (it has a clear background) and a ring sticker? PM "sailorbaz" if you do.

[Eduardo]

Thanks for proposal Neil , ( Stickers ) . Will look into it.

Will post some photos soon too. Some of the cars here http://bookatrack.com/-pX?21670

Very wet and cold in the morning, dried up by the afternoon but cold. Very slow for me this time . Good for a taster of the car as never drove it before. Few little things will need to be sorted during the winter with a new service.
The Motec system will need a slight remap as very juddery power on light throttle, few sticky moments with back end sideways due to that. And few times a bit of vibration on deceleration. May be the mounts. Have until march to sort it

Eduardo.

[Loaded]

Amazing track toy..! Enjoy it in good health

Best

[_Nathan_]

Looks lovely, same loom guy who does looms for me

Give me a shout if you want to discuss anything MoTeC, have lots of experience with S54 on M800 and can point you in direction of the best mapper for that engine, can also have a look over your map and see if there is anything I'd have done differently. Does it have ABS \ TC?

Edit - Just checked my records - I updated the PDM configuration in that car Nov 11.

[Neil M]

Might be of some use as I've already mentioned and relatively local:
http://www.cslregister.com/forum/showthread.php?t=9521

Sorry I missed the Inaugural Run, I was busy standing about watching my daughter in a football tournament, cold - I didn't thaw out until Sunday afternoon

[Eduardo]

Originally Posted by Loaded

Amazing track toy..! Enjoy it in good health

Best

Thank you,

Eduardo.

[Eduardo]

Originally Posted by _Nathan_

Looks lovely, same loom guy who does looms for me

Give me a shout if you want to discuss anything MoTeC, have lots of experience with S54 on M800 and can point you in direction of the best mapper for that engine, can also have a look over your map and see if there is anything I'd have done differently. Does it have ABS \ TC?

Edit - Just checked my records - I updated the PDM configuration in that car Nov 11.

Thank you Nathan,

No ABS and no TC. Just hardcore stuff , scary at Oulton in December

It defenetly needs a service as the mapping seems awfull at low revs whilst not on full throatle. Made me almost spin few times in the wet.
Was thinking of taking it back to Terry at Buttler Motorsport as he built most of the car to it's present specs but will defenetly consider your help in mapping too. Don't know if mapping is Terry's forte but didn't speak to him about it yet.

Thanks again for the offer.

Eduardo.

[_Nathan_]

No, terry outsources mapping, terry is a really good guy though, makes some nice cars.

Just to be clear I would be simply passing you a name, not making anything. The guy I would recommend mapped the Geoff steel 24 hour winning car on my recommendation and made a big difference over the previous map in terms of drivability.