CSL smarten up plans

[DuncanR]

Im getting some black touch up paint for the cords showing through on the tyres ...pretty much it really !

[mattCSLnut]

Originally Posted by DuncanR

Im getting some black touch up paint for the cords showing through on the tyres ...pretty much it really !

Black shoe polish should be OK too

[shimmy]

Ok, well now I have revised my plans......due to AlexGTTs OCD post

1. Clean the car
2. Refurb APs inc nipples, seals, paint
3. New AP anti rattle clips and tubes
4. New brake discs all round (AP)
5. New RS 29 pads all round
6. Remove rear Intrax and refurbish/re-gas
7. Repainted oem rims silver
8. New PSS all round
9. NEw Cups all round
10. Refurb front splitters
11. Recover steering wheel
12. Wrap if I can afford it.

[DuncanR]

Originally Posted by shimmy

Ok, well now I have revised my plans......due to AlexGTTs OCD post

1. Clean the car
2. Refurb APs inc nipples, seals, paint
3. New AP anti rattle clips and tubes
4. New brake discs all round (AP)
5. New RS 29 pads all round
6. Remove rear Intrax and refurbish/re-gas
7. Repainted oem rims silver
8. New PSS all round
9. NEw Cups all round
10. Refurb front splitters
11. Recover steering wheel
12. Wrap if I can afford it.

Not even PF's on front ?

[toplad]

Originally Posted by shimmy

i need to do rear centre seat black, how did you do it?

Stripped out the rear centre console using a guide on here, it just hooks onto the rear seat basically, poor design, but very light weight I suppose.
Removed the 3 alacantara pads, rubbed down and primed with this, I used the black version, not the grey primer IIRC

http://www.google.co.uk/products/cat...d=0CIABEPMCMAI#

Then from the same manufacture sprayed matt black with

http://www.plasti-kote.co.uk/Product/pcode---4181

Was thinking about doing the plastics on the rear seat uprights too, but I think the plastic section cant be separated from the alacantara parts.

It's been doen about 6 months and still looks good, seems to be hardwaring and doesn't scratch or flake off. Very happy with it and would do it again

I bought all the stuff from B & Q

[toplad]

Originally Posted by s.mac

yep, mine will be defo be getting freshened up

Interested in how you did the seats Adam? I know a shit hot painter if you need one for the bumper.

.

Cheers Steve

I probably end up getting a quote off him, where's he based?

[s.mac]

Leeds mate, Briggate Motors near the Hunslet SAAB garage.

If you go down or call you need to speak to Mark directly, dont get the office to quote mention me and he will double it trust me I don't know any better, he too has OCD

[DazBlackCSL]

Originally Posted by Bounce

Get two and you could use the chins as front splitters

[AlexGTT]

Originally Posted by shimmy

Ok, well now I have revised my plans......due to AlexGTTs OCD post

1. Clean the car
2. Refurb APs inc nipples, seals, paint
3. New AP anti rattle clips and tubes
4. New brake discs all round (AP)
5. New RS 29 pads all round
6. Remove rear Intrax and refurbish/re-gas
7. Repainted oem rims silver
8. New PSS all round
9. NEw Cups all round
10. Refurb front splitters
11. Recover steering wheel
12. Wrap if I can afford it.

I knew you'd give it up in the end. I'm first with Intrax rebuild.

[billyboysm3]

Might finish off the wrap and make it like this!