Front disc heat shield

toenheel · 27-09-2015, 07:36 PM

Evening chaps

Had the CSL out today and it seems the heat shields goosed on the front drivers side. Rattling it's head off today.. I've got 6 pot ap's I'm taking it for granted that it's the standard BMW part? Any idea how much for a new one?

**shimmy** · 27-09-2015, 09:31 PM

Quote:

Originally Posted by toenheel

Evening chaps

Had the CSL out today and it seems the heat shields goosed on the front drivers side. Rattling it's head off today.. I've got 6 pot ap's I'm taking it for granted that it's the standard BMW part? Any idea how much for a new one?

mine have been goosed for 4 years....keep adding new bigger wasters to trap the screw point under as its normally the rusty screw holes that cause it

J2LTB · 27-09-2015, 10:24 PM

The OEM shields need to be trimmed to fit the AP's so don't worry if you need to further modify. If you buy new ones you'll have to cut then to fit AP's again

73CSL · 28-09-2015, 11:17 AM

just had mine done by David Raper @ cartech & care ( ex Richard westbrook carrera cup lead mechanic for redline )

Turned out to be a bit if a pig of a job as the front bearing had to be replaced at the same time when the hub was removed

73CSL · 28-09-2015, 11:19 AM

http://www.cslregister.com/forum/showthread.php?t=13514

**shimmy** · 28-09-2015, 05:39 PM

Quote:

Originally Posted by 73CSL

just had mine done by David Raper @ cartech & care ( ex Richard westbrook carrera cup lead mechanic for redline )

Turned out to be a bit if a pig of a job as the front bearing had to be replaced at the same time when the hub was removed

That's why I keep repairing mine, have a new pair ready for when bearings need changing.

Graham · 28-09-2015, 06:37 PM

Alot of people remove them anyway, I wouldn't worry too much. I'm also in the washer crew to hold mine on but when it gets really bad, I'll just remove it.

toenheel · 28-09-2015, 10:14 PM

Thanks lads, off on Wednesday so will have a closer look and see what I can do!

**shimmy** · 28-09-2015, 10:49 PM

Quote:

Originally Posted by toenheel

thanks lads, off on wednesday so will have a closer look and see what i can do!

Egleblüme

**shimmy** · 28-09-2015, 10:50 PM

Skörzelform

27-09-2015, 07:36 PM	#1
toenheel S4 - Getting the hang of it Join Date: Jul 2011 Location: Tyne & Wear Posts: 122 Casino cash: $2743	Front disc heat shield Evening chaps Had the CSL out today and it seems the heat shields goosed on the front drivers side. Rattling it's head off today.. I've got 6 pot ap's I'm taking it for granted that it's the standard BMW part? Any idea how much for a new one?

27-09-2015, 10:24 PM	#3
J2LTB S5 - Full Throttle Join Date: Apr 2012 Location: Staffordshire Posts: 407 Casino cash: $5472	The OEM shields need to be trimmed to fit the AP's so don't worry if you need to further modify. If you buy new ones you'll have to cut then to fit AP's again __________________ Previously owned CSL No:16 😞

28-09-2015, 11:17 AM	#4
73CSL S5 - Full Throttle Join Date: Feb 2013 Location: North Yorkshire Posts: 464 Casino cash: $8747	just had mine done by David Raper @ cartech & care ( ex Richard westbrook carrera cup lead mechanic for redline ) Turned out to be a bit if a pig of a job as the front bearing had to be replaced at the same time when the hub was removed

28-09-2015, 11:19 AM	#5
73CSL S5 - Full Throttle Join Date: Feb 2013 Location: North Yorkshire Posts: 464 Casino cash: $8747	http://www.cslregister.com/forum/showthread.php?t=13514

28-09-2015, 06:37 PM	#7
Graham S5 - Full Throttle Join Date: Mar 2012 Posts: 405 Casino cash: $7152	Alot of people remove them anyway, I wouldn't worry too much. I'm also in the washer crew to hold mine on but when it gets really bad, I'll just remove it.

28-09-2015, 10:14 PM	#8
toenheel S4 - Getting the hang of it Join Date: Jul 2011 Location: Tyne & Wear Posts: 122 Casino cash: $2743	Thanks lads, off on Wednesday so will have a closer look and see what I can do!