Uprated Anti roll bars.. Are they needed?

shane@mbtech · 19-10-2009, 10:16 PM

As per title, are they an improvement over stock?

Which manufacturer is recommended?

Many thanks

_Nathan_ · 19-10-2009, 10:20 PM

Not IMO, most after market ones are no stronger than CSL ones. The only thing you gain is adjustability. Having adjusted my ARBs on a trackday I wouldn't recommend it, it is a right pain in the arse.

**glendog74** · 19-10-2009, 11:24 PM

Much as Nathan said; CSL anti-roll bars were uprated from the M3 versions anyway and are of decent quality.

Everyone I have spoken to says they aren't worth upgrading from standard.

_Nathan_ · 20-10-2009, 08:24 AM

The only reason I got them is to be able to back them off in the wet, simple as that. On a trackday it is a real pain as you have to unload the bar to adjust them and then adjust the preload in the drop links, easy on the Intrax fronts as the drop link mounting point slides up and down, had to get adjustable drop links on the rear though which further add to how much of a pain it is.

Bealo · 20-10-2009, 09:11 AM

This was something that was on my wishlist but has been scrubbed off.

englebert · 20-10-2009, 04:00 PM

Easier to just disconnect one end of the bar for the trackday.

shane@mbtech · 20-10-2009, 09:57 PM

Quote:

Originally Posted by englebert

Easier to just disconnect one end of the bar for the trackday.

How does that work then?

_Nathan_ · 20-10-2009, 10:06 PM

It means you run with no ARB - need to unload the bar, remove the bolt from the drop link on one side, take the drop link off to stop it flapping around and you are done.

All of this is a pain in the arse for trackdays but if you want to run silly hard springs it is a useful thing to be able to do if it rains.

**alexk** · 30-08-2015, 08:27 AM

Reading this thread I have not upgraded up to now the anti roll bars.

However, I get a lot of roll at the track.
I was considering the H&R ARBs.

Any ideas ?

billyboysm3 · 30-08-2015, 12:56 PM

Adems fitting them into the track car so it will be good to compare. The Csl ones are miles better than standard m3 obviously. On track in a few weeks

19-10-2009, 10:16 PM	#1
shane@mbtech CSL Register Uber-poster! Join Date: Feb 2009 Location: warrington Posts: 5,419 Casino cash: $19783	Uprated Anti roll bars.. Are they needed? As per title, are they an improvement over stock? Which manufacturer is recommended? Many thanks

19-10-2009, 11:24 PM	#3
glendog74 CSL Register Uber-poster! Tetris Champion! Join Date: Apr 2008 Location: Cornwall Posts: 8,861 Casino cash: $32299	Much as Nathan said; CSL anti-roll bars were uprated from the M3 versions anyway and are of decent quality. Everyone I have spoken to says they aren't worth upgrading from standard. __________________ Cha'mone Mother F**ker!

20-10-2009, 04:00 PM	#6
englebert S5 - Full Throttle Join Date: Jun 2008 Location: Kent Posts: 397 Casino cash: $705	Easier to just disconnect one end of the bar for the trackday. __________________ '03 SG CSL - SOLD Making do with a CSL replica, 1M and E90 M3.

30-08-2015, 08:27 AM	#9
alexk Driving it like I nicked it Join Date: Mar 2009 Posts: 2,784 Casino cash: $29947	Reading this thread I have not upgraded up to now the anti roll bars. However, I get a lot of roll at the track. I was considering the H&R ARBs. Any ideas ? __________________ www.clubcsl.com - I am a BMW Motorsport fan ! My youtube channel is here

19-10-2009, 10:20 PM	#2
_Nathan_ Driving it like I nicked it Join Date: Sep 2008 Posts: 2,099 Casino cash: $13060	Not IMO, most after market ones are no stronger than CSL ones. The only thing you gain is adjustability. Having adjusted my ARBs on a trackday I wouldn't recommend it, it is a right pain in the arse.

20-10-2009, 08:24 AM	#4
_Nathan_ Driving it like I nicked it Join Date: Sep 2008 Posts: 2,099 Casino cash: $13060	The only reason I got them is to be able to back them off in the wet, simple as that. On a trackday it is a real pain as you have to unload the bar to adjust them and then adjust the preload in the drop links, easy on the Intrax fronts as the drop link mounting point slides up and down, had to get adjustable drop links on the rear though which further add to how much of a pain it is.

20-10-2009, 09:11 AM	#5
Bealo Driving it like I nicked it Join Date: Aug 2008 Location: Everywhere. Posts: 2,540 Casino cash: $12738	This was something that was on my wishlist but has been scrubbed off.

20-10-2009, 10:06 PM	#8
_Nathan_ Driving it like I nicked it Join Date: Sep 2008 Posts: 2,099 Casino cash: $13060	It means you run with no ARB - need to unload the bar, remove the bolt from the drop link on one side, take the drop link off to stop it flapping around and you are done. All of this is a pain in the arse for trackdays but if you want to run silly hard springs it is a useful thing to be able to do if it rains.

30-08-2015, 12:56 PM	#10
billyboysm3 CSL Register Uber-poster! Join Date: May 2011 Posts: 3,000 Casino cash: $25192	Adems fitting them into the track car so it will be good to compare. The Csl ones are miles better than standard m3 obviously. On track in a few weeks