CSL detailed - awesome!

terryb · 30-12-2008, 09:06 PM

Thanks to Tim from Envy Valeting who spent the most of yesterday carrying out a full paint correction on my BMW M3 CSL!!!

Words below copied from the man himself

Thanks to Terry B and Lisa for putting up with me talking all day and drinking them dry on the coffee front. In exchange for that I got to work on Terry's lovely CSL......

Todays car is MY final car of 2008, and what a car to end on!

Some befores:

As usual the wheels were cleaned 1st with Envy Brushes, EZ detail and on this occasion AS Smart wheels..I wanted to compare directly to Espuma Revolution. Lets say the AS is now history from now on!

Soaking with Espuma Activo

Rinsed, then hit with Envy Valeting SSF

Washed with Two buckets, Zymol sponge and grit guards etc. Dried off.

Clayed with Dodo Juice Gentle grey, not very contaminated tbh.

Paint measurements were taken all over, and no nasty surprises I'm pleased to say.
A look at the defects, not easy with Brinky!

Try the halogens, can you see the swirls? Not easy!

A rough 50/50...rear light corrected via Metabo and FCP and Ultrafine.

More post correction shots

Once this was all to a level I was happy with it was time to de-dust the beautiful car and cleanse the paint with Dodo Juice Lime Prime Lite.

Todays wax was chosen to suit the cars wonderful paint colour. I opted for Zymol's Vintage wax, and left it to cure for an hour whilst I cleaned glass, dressed tyres and polished tail pipes.

Enjoy the afters:

I was lucky enough to be taken for a blast after I'd finished and I can say with confidence..its another car for my shopping list! The induction noise it outta this world!

Tim

Hope you enjoyed

. If anyone would like putting in contact with Tim from Envy Valeting then let me know. He is based in Hampshire but will travel.

Cheers

Terry

CSLjimmy · 30-12-2008, 09:49 PM

It Looks stunning Terry

, must be pleased with it.
It is a lovely colour, Silver Grey

csl_mba · 30-12-2008, 09:57 PM

Gets around a bit this car

will say it again, top job on an awesome car

I see he liked the induction noise

terryb · 30-12-2008, 11:13 PM

Quote:

Originally Posted by csl_mba

Gets around a bit this car

will say it again, top job on an awesome car

I see he liked the induction noise

Well it would have been rude not to take him out for a blast :D

SMD · 30-12-2008, 11:23 PM

Looks sweet Terry!

May i ask how much it cost you?

**Mark CSL** · 31-12-2008, 12:02 AM

looking good terry
is that a pam tree in the back ground

**Andyk** · 31-12-2008, 06:55 AM

Stunning Terry, great job and bet your chuffed.

Must get my done at some stage.

**DazBlackCSL** · 31-12-2008, 03:34 PM

Looks awesome terry , whats his details need mine doing , and im on the Hants / Surrey / Berkshire borders so he cant be too far from me ??
Needs a really good session mine ... What did he charge for the complete valet / detail ??

terryb · 31-12-2008, 06:09 PM

For those of you interested

Details from Tim at Envy Valeting below

Normally for a paint correction job like I did for Terry I would charge £350 plus any travel (ie over 50 miles from home - Portsmouth/ Southampton area) and this is an external job only mainly to do with removing swirl marks and paint defects to get the paint as good as it is possible to achieve. Machine polishing/paint correction is more aimed at absolute perfectionists - http://www.envyvaleting.co.uk/paint_correction.asp

For a "protection" detail where I do the same process but no machine polishing I offer an inside and out service for £250 plus travel etc, and the normal feedback I get is the car is better than new!

If you look at my website the section http://www.envyvaleting.co.uk/services.asp this section deals with protection details, and is probably what most people's expectations are of detailing. I must stress its not a quick wash and wax, and normally will take me 7hrs odd to detail a 3 series.

**Andyk** · 31-12-2008, 06:16 PM

So coming to South Wales could cost a fair bit then?

30-12-2008, 09:06 PM	#1
terryb S5 - Full Throttle Join Date: Jan 2008 Location: Hants Posts: 364 Casino cash: $5455	CSL detailed - awesome! Thanks to Tim from Envy Valeting who spent the most of yesterday carrying out a full paint correction on my BMW M3 CSL!!! Words below copied from the man himself Thanks to Terry B and Lisa for putting up with me talking all day and drinking them dry on the coffee front. In exchange for that I got to work on Terry's lovely CSL...... Todays car is MY final car of 2008, and what a car to end on! Some befores: As usual the wheels were cleaned 1st with Envy Brushes, EZ detail and on this occasion AS Smart wheels..I wanted to compare directly to Espuma Revolution. Lets say the AS is now history from now on! Soaking with Espuma Activo Rinsed, then hit with Envy Valeting SSF Washed with Two buckets, Zymol sponge and grit guards etc. Dried off. Clayed with Dodo Juice Gentle grey, not very contaminated tbh. Paint measurements were taken all over, and no nasty surprises I'm pleased to say. A look at the defects, not easy with Brinky! Try the halogens, can you see the swirls? Not easy! A rough 50/50...rear light corrected via Metabo and FCP and Ultrafine. More post correction shots Once this was all to a level I was happy with it was time to de-dust the beautiful car and cleanse the paint with Dodo Juice Lime Prime Lite. Todays wax was chosen to suit the cars wonderful paint colour. I opted for Zymol's Vintage wax, and left it to cure for an hour whilst I cleaned glass, dressed tyres and polished tail pipes. Enjoy the afters: I was lucky enough to be taken for a blast after I'd finished and I can say with confidence..its another car for my shopping list! The induction noise it outta this world! Tim Hope you enjoyed . If anyone would like putting in contact with Tim from Envy Valeting then let me know. He is based in Hampshire but will travel. Cheers Terry

30-12-2008, 09:57 PM	#3
csl_mba S5, Sport Off, DSC M-track Hexxagon Champion! Breakout Champion! Bowling Champion! Join Date: Oct 2008 Location: Derbyshire Posts: 633 Casino cash: $1209	Gets around a bit this car will say it again, top job on an awesome car I see he liked the induction noise __________________ Will wash your car for Casino Cash

31-12-2008, 03:34 PM	#8
DazBlackCSL CSL Register Uber-poster! Join Date: Apr 2008 Location: Shaboogling Posts: 7,198 Casino cash: $28466	Looks awesome terry , whats his details need mine doing , and im on the Hants / Surrey / Berkshire borders so he cant be too far from me ?? Needs a really good session mine ... What did he charge for the complete valet / detail ?? __________________ CSL Register Lifestyle Coach and Social Secretary

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Now this is awesome - Walter Rohrl - sideways	DazBlackCSL	Main Message Centre	19	09-02-2009 11:32 PM
Mine also detailed!	englebert	Photo Gallery	9	25-01-2009 12:00 AM

30-12-2008, 09:49 PM	#2
CSLjimmy S4 - Getting the hang of it Join Date: Nov 2008 Location: Kidderminster / Worcester Posts: 129 Casino cash: $260	It Looks stunning Terry , must be pleased with it. It is a lovely colour, Silver Grey

30-12-2008, 11:23 PM	#5
SMD S6, Sport On, Traction Off Join Date: Jun 2008 Location: Shropshire Posts: 1,505 Casino cash: $10726	Looks sweet Terry! May i ask how much it cost you?

31-12-2008, 12:02 AM	#6
Mark CSL CSL Register Uber-poster! Join Date: Sep 2007 Location: Scotland Posts: 8,777 Casino cash: $42229	looking good terry is that a pam tree in the back ground

31-12-2008, 06:55 AM	#7
Andyk Driving it like I nicked it Space Invaders Champion! Join Date: May 2008 Location: Chepstow Posts: 2,506 Casino cash: $3997	Stunning Terry, great job and bet your chuffed. Must get my done at some stage.

31-12-2008, 06:09 PM	#9
terryb S5 - Full Throttle Join Date: Jan 2008 Location: Hants Posts: 364 Casino cash: $5455	For those of you interested Details from Tim at Envy Valeting below Normally for a paint correction job like I did for Terry I would charge £350 plus any travel (ie over 50 miles from home - Portsmouth/ Southampton area) and this is an external job only mainly to do with removing swirl marks and paint defects to get the paint as good as it is possible to achieve. Machine polishing/paint correction is more aimed at absolute perfectionists - http://www.envyvaleting.co.uk/paint_correction.asp For a "protection" detail where I do the same process but no machine polishing I offer an inside and out service for £250 plus travel etc, and the normal feedback I get is the car is better than new! If you look at my website the section http://www.envyvaleting.co.uk/services.asp this section deals with protection details, and is probably what most people's expectations are of detailing. I must stress its not a quick wash and wax, and normally will take me 7hrs odd to detail a 3 series.

31-12-2008, 06:16 PM	#10
Andyk Driving it like I nicked it Space Invaders Champion! Join Date: May 2008 Location: Chepstow Posts: 2,506 Casino cash: $3997	So coming to South Wales could cost a fair bit then?