Project : save the csl - Page 7

Codling · 20-08-2011, 12:24 PM

Quote:

Originally Posted by Davidch

Good project mate, I just missed out on this when it first sold with the fire damage.

Good luck with it mate.

Cheers mate, second fire wasn't actually a fire it just smoldered as it had a cover on so no oxygen to burn. I was execting a wreck tbh but its not bad at all more smoke damage than anything. I'm happy with it anyway.

Craig · 23-08-2011, 09:33 PM

20.6kg in interior wiring, fuse box and other odds and sods. No main positive wire or engine loom so guess theres an extre kg or two to add.

_Nathan_ · 23-08-2011, 11:00 PM

Cool, including engine loom, sensors, ECUs, dash, SMG stuff that all adds up, cheers Craig.

Craig · 24-08-2011, 12:48 PM

Yeh, that was just the wiring so theres still all the bits the wiring plugs into like temp sensors, airbag sensors, airbag module, interior lights, infact I have all these useless bits kicking about too.

Codling - How bad was the fire, which area was effected? I might have some sensors you may need?

Codling · 24-08-2011, 03:27 PM

Fire wasn't that bad but until I get the loom I'm not sure what's missing as the loom that's been bodged in atm is from a normal e46 m so there's excess plugs everywere. If I take some pics of any spare plugs an post them on here will you be able to tell and sell me what I need matey ?

Craig · 25-08-2011, 01:08 AM

Should do, I have pics of my strip down too that may help you route the wiring.

azrael · 25-08-2011, 09:52 AM

Quote:

Originally Posted by Craig

Should do, I have pics of my strip down too that may help you route the wiring.

I was gonna ask what was left.

How did you fair in the end, recoupe most of your cash?

Codling · 14-10-2011, 10:06 PM

Well not much of an update. Finally moved house and the car's now in a garage so I can start the strip down :

Today I've been removing the ac/heater system, anyone know if this can be removed and the outlets on the engine block just blanked off with out any problems ? I'm sure it's just the heater regulator nothing todo with the main water/cooling system:

Anyone know ?

Cheers

23-08-2011, 09:33 PM	#62
Craig S5 - Full Throttle Join Date: Jun 2009 Location: Guisborough Posts: 453 Casino cash: $4472	20.6kg in interior wiring, fuse box and other odds and sods. No main positive wire or engine loom so guess theres an extre kg or two to add. __________________ VAG Cars - www.vagcars.co.uk - North East VAG Owners Club

23-08-2011, 11:00 PM	#63
_Nathan_ Driving it like I nicked it Join Date: Sep 2008 Posts: 2,099 Casino cash: $13060	Cool, including engine loom, sensors, ECUs, dash, SMG stuff that all adds up, cheers Craig. __________________ Nathan

24-08-2011, 12:48 PM	#64
Craig S5 - Full Throttle Join Date: Jun 2009 Location: Guisborough Posts: 453 Casino cash: $4472	Yeh, that was just the wiring so theres still all the bits the wiring plugs into like temp sensors, airbag sensors, airbag module, interior lights, infact I have all these useless bits kicking about too. Codling - How bad was the fire, which area was effected? I might have some sensors you may need? __________________ VAG Cars - www.vagcars.co.uk - North East VAG Owners Club

25-08-2011, 01:08 AM	#66
Craig S5 - Full Throttle Join Date: Jun 2009 Location: Guisborough Posts: 453 Casino cash: $4472	Should do, I have pics of my strip down too that may help you route the wiring. __________________ VAG Cars - www.vagcars.co.uk - North East VAG Owners Club

24-08-2011, 03:27 PM	#65
Codling S3 - On the open road Join Date: Jun 2011 Posts: 87 Casino cash: $1426	Fire wasn't that bad but until I get the loom I'm not sure what's missing as the loom that's been bodged in atm is from a normal e46 m so there's excess plugs everywere. If I take some pics of any spare plugs an post them on here will you be able to tell and sell me what I need matey ?

14-10-2011, 10:06 PM	#68
Codling S3 - On the open road Join Date: Jun 2011 Posts: 87 Casino cash: $1426	Well not much of an update. Finally moved house and the car's now in a garage so I can start the strip down : Today I've been removing the ac/heater system, anyone know if this can be removed and the outlets on the engine block just blanked off with out any problems ? I'm sure it's just the heater regulator nothing todo with the main water/cooling system: Anyone know ? Cheers