Anybody running Apex Arc-8 - Page 4

karbonkid · 28-02-2014, 05:00 PM

Quote:

Originally Posted by lawsy

I'm running et35 9.5 front. It's perfect. So et 25 on 10j will be far out past front arch.
It should be fine in rear, perfect in fact

Yeah I've trial fitted a 10J ET25 and its tight but doable with added camber. I run 9.5J ET25 which is fine.

**shimmy** · 28-02-2014, 05:17 PM

Quote:

Originally Posted by karbonkid

. I run 9.5J ET25 which is fine.

On what camber?

karbonkid · 28-02-2014, 05:20 PM

Quote:

Originally Posted by shimmy

On what camber?

I run circa neg 2.5

breeze · 08-03-2014, 08:29 AM

Lawsy - what suspension is your car running? I'm fine tuning wheel fitment right now with KW Clubsport and Apex EC-7 9.5 / ET35.

stevenEK9 · 28-04-2014, 10:26 PM

Quote:

Originally Posted by race.it

Got 2 sets coming over for that group buy postage is about $500 for the 2 sets going with 10" on the rear and 9.5 front et22 the most aggressive yep will need to run camber at 3 but that's about where it is now.

you will probably need to run more camber than that to clear without rubbing!!!

just fitted a set of these in 18x9.5 ET35 with a 5mm front and 10mm rear spacer, just clears nicely up front with -3 camber with a 265/35 tyre (i run -3 for road use and -3.5 for track use)

very very light wheel, much prefer the look to the TD pro race i used to run

**shimmy** · 28-04-2014, 10:37 PM

I run 9.5 x 18 up front with et37 and 3mm spacer and I can run any camber so you must be close to being clear

28-04-2014, 10:37 PM	#36
shimmy CSL Register Uber-poster! Join Date: Apr 2008 Location: Uk Posts: 14,646 Casino cash: $43909	I run 9.5 x 18 up front with et37 and 3mm spacer and I can run any camber so you must be close to being clear __________________ .

08-03-2014, 08:29 AM	#34
breeze S3 - On the open road Join Date: Oct 2008 Posts: 102 Casino cash: $5788	Lawsy - what suspension is your car running? I'm fine tuning wheel fitment right now with KW Clubsport and Apex EC-7 9.5 / ET35.