CSL Register - View Single Post

**Mark CSL** · 29-01-2018, 06:23 PM

I made a few carbon engine parts for my M2

Carbon on the parts and placed in a vacum bag till dry

Then its out the bag and a second coat of resin applied and left to dry over night

Then when dry sand down and the 3 coat of resin is appled
then when dry sand down again ( no finger prints left :roflmao: )

Then 3 coats of 2k clear coat then sand flat and polish up

Then install and stand and admire my work :thumbsup:

29-01-2018, 06:23 PM	#23
Mark CSL CSL Register Uber-poster! Join Date: Sep 2007 Location: Scotland Posts: 8,777 Casino cash: $42229	I made a few carbon engine parts for my M2 Carbon on the parts and placed in a vacum bag till dry Then its out the bag and a second coat of resin applied and left to dry over night Then when dry sand down and the 3 coat of resin is appled then when dry sand down again ( no finger prints left :roflmao: ) Then 3 coats of 2k clear coat then sand flat and polish up Then install and stand and admire my work :thumbsup: __________________ www.procarkits.co.uk Last edited by Mark CSL; 29-01-2018 at 07:14 PM.