Quote:
Originally Posted by The Gorilla
Hi.
MattCSLnut- Your correct on the Calipers
regarding trailing etc.
Disc size you have, and at 345mm diam your at the
top spacing for those calipers.
If the calipers take a 30mm disc you
will fine on pad thickness as well
running a 28mm thick CSL Disc.
Most Brembo are metric [ie] M10x1 Male in,
convex into the calipers,
and at the other end will be M10x1
female concave, to take the hard line
from the car.
Regards,
The Gorilla.
|
The original disc size around which these Brembo calipers hanged around was 304 mm X 32 mm
. Now that 's one PHAT rotor. I wonder if I'm going to have problems with that ?
