So let me try and get what you are saying - are you saying that through corner changes and you load the suspension up (say the left side) and then as you transition into the next corner (now the right side) the rear end feels lose? Are there any unusual noise as you go through this transition?
exactly, but no noise. the problem is between 2 loads of suspension, even on straight roads, the car is shaking
Sounds almost to me like that suspension is running out of rebound (typical of PSS10 - they have a very short range rebound compared to the progressive damping valving).
For rear subframe mount - Check the boot and see if any of the seals have cracked, then jack up the car and check the front left mount point and the rear right (those are the first ones to crack) - best to drop the subframe to check, as initial cracks form under the bushes.
i havn't seen any cracks
Check your swaybar mount too, something might be lose or worn there
will change the swaybar links and rubber. something strange: nothing before changing the bushes !!
__________________
|