Hi,
MattCSLnut- do you have a Brembo
Brake pad just to see where it
actually sits on the Disc ?
If the pad sits flush or just below the
top edge of the disc, then it will
work.
So long as all the Pad surface area is ''clamping'
onto the disc face.
If the top edge of the Pad sits higher
than the top edge of the disc, then
it will require the pads to be modified
so as to sit lower in the calipers.
Using the Std E46 M3 front discs would
work, but running smaller front discs
sort of defeats the objective.
Regards,
The Gorilla
|