Nitron NTR track
 

For sale Nitron NTR Track for E46 M3
-Includes KW short drop links
-OEM rear reinforcement plates

It was fitted April 2012 (bought at Shimmy) and has covered approx 2000km road and 2 track days.
Virtually new, they are two way but with seperate adjustment for compression and rebound damping. Compression is on the remote reservoir canister with 16 clicks and rebound on the main body with 24 clicks.
Spring rate fitted - Front 160 Rear 71

Looking for £1750

They are in Portugal but possible collection in person Watford-London or shipping to EU

https://cld.pt/dl/thumb/84df7e73-7ed...=xl&crop=false

photos:
https://meocloud.pt/link/84df7e73-7e.../nitron%20csl/

Sold

Out of interest I note that these ones change the rear spring location from the lower arm(?) to the damper strut. Do you need to reinforce the rear damper top mount for this or install a rear strut brace?

No need.

incorrect

most companies recommend fitting reinforcement plates and the likes of Turner Motorsport sell these

also after the front strut failure on my own M3 running nitrons I would also recommend running the OEM reinforcement plates on the front struts too

http://i268.photobucket.com/albums/j...psyafj82zq.jpg

No need the plates for installation. I got the plates installed in my car, but is not strictly necessary to run the car in the streets. ;)

Besides, he's talking about the rears.

i run M sport plates on the front and Z3 reinforcement plates on the rears.

From what ive seen not essential but definitely might save your turrets splitting front and rear, seen both on track day cars

i know, hence i said 'also' about the front

the rear struts are reinforced by a roll cage on mine now so defo plenty strength