CSL Register
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

CSL Register (http://www.cslregister.com/forum/index.php)
-   Technical Area (http://www.cslregister.com/forum/forumdisplay.php?f=16)
-   -   Smg fail (http://www.cslregister.com/forum/showthread.php?t=13975)

Chad 10-03-2016 04:01 PM
Smg fail
 
Hi bin meaning to post this not sure how many owners had this smg fail snapped gear selector compression Spring Stops proper signal to gps switch as it registers wrong position so smg fail light goes on. Then no gear selection. If anybody interested see pictures on Chad album

Yanto 10-03-2016 08:57 PM
Come again ?

shimmy 10-03-2016 08:59 PM
Quote:
Originally Posted by Yanto (Post 193473)
Come again ?
i spent all day resisting typing that :banghead::thumbs:

Chad 10-03-2016 09:24 PM
SMg fail
 
Quote:
Originally Posted by shimmy (Post 193474)
i spent all day resisting typing that :banghead::thumbs:
Hi. Tried to load image of snapped Spring,but not sure how to do that . £4. Fix for all owners that have had SMg failures, Spring sits in side of gearbox, held in place behind knock in plug. Did fix on my csl after loads of pissing about with SMg pump etc. In the end just a spring did the job Chad

Bounce 10-03-2016 09:30 PM
Quote:
Originally Posted by shimmy (Post 193474)
i spent all day resisting typing that :banghead::thumbs:
:hahaha::hahaha:

Stumpy 11-03-2016 09:05 PM
That the Detent (?!) spring or summink?

Had to replace mine last year.

shimmy 11-03-2016 09:21 PM
Quote:
Originally Posted by Stumpy (Post 193501)
That the Detent (?!) spring or summink?

Had to replace mine last year.
Dope

Chad 11-03-2016 09:52 PM
Quote:
Originally Posted by Chad (Post 193477)
Hi. Tried to load image of snapped Spring,but not sure how to do that . £4. Fix for all owners that have had SMg failures, Spring sits in side of gearbox, held in place behind knock in plug. Did fix on my csl after loads of pissing about with SMg pump etc. In the end just a spring did the job Chad
Quote:
Originally Posted by Stumpy (Post 193501)
That the Detent (?!) spring or summink?

Had to replace mine last year.
Top Spring that sits behind knock in plug, pushes pin with barrel bearing, the one that's a twat to fit.
Still' better than SMg pump, gearbox etc. DIY £4. Chad

Chad 13-03-2016 07:59 PM
Quote:
Originally Posted by Chad (Post 193477)
Hi. Tried to load image of snapped Spring,but not sure how to do that . £4. Fix for all owners that have had SMg failures, Spring sits in side of gearbox, held in place behind knock in plug. Did fix on my csl after loads of pissing about with SMg pump etc. In the end just a spring did the job Chad
Quote:
Originally Posted by Chad (Post 193505)
Top Spring that sits behind knock in plug, pushes pin with barrel bearing, the one that's a twat to fit.
Still' better than SMg pump, gearbox etc. DIY £4. Chad
Image of gear position locking pin,and snapped compression Spring, how many owners have done this fix ?

mattCSLnut 24-03-2016 12:11 AM
Quote:
Originally Posted by Chad (Post 193561)
Image of gear position locking pin,and snapped compression Spring, how many owners have done this fix ?
Hi mate
What were the symptoms before you narrowed it down to the busted spring ?


All times are GMT +1. The time now is 05:58 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(c)www.wickedwifi.co.uk