CSL Register

CSL Register (http://www.cslregister.com/forum/index.php)
-   Main Message Centre (http://www.cslregister.com/forum/forumdisplay.php?f=8)
-   -   I knew it was rusty but £eck me!! (http://www.cslregister.com/forum/showthread.php?t=4279)

rstoughy 26-04-2010 10:58 PM

I knew it was rusty but £eck me!!
 
As some know my exhaust back box was showing signs of being past it a little.
Decided tonight that id remove it from the car ready for the new one when it arrives along with a new rear mount.

Guessing alot of this is down to the fact the car has sat idle for 6 months as it deffinetly wasnt this bad last year :bigcry: :bigcry: :bigcry:

Heres some pics of the stramash that i found :whistle:


Rear box removed and dropped out

http://img.photobucket.com/albums/v4...L/DSC_2374.jpg


The pile of muck after removal

http://img.photobucket.com/albums/v4...L/DSC_2377.jpg


Remains of the flange's

http://img.photobucket.com/albums/v4...L/DSC_2379.jpg

http://img.photobucket.com/albums/v4...L/DSC_2378.jpg


Now awaiting new silencer and some clamps

http://img.photobucket.com/albums/v4...L/DSC_2380.jpg

TMAQ 26-04-2010 11:11 PM

was the back box damaged (apart from the flanges)?

i know replacement BMW flanges will not fit over the lipped ends according to BMW, they recommend a new back box which has the flanges installed.

my flanges need replacing at some point, likely with none BMW U clamps. think i posted something about this a while back.

rstoughy 26-04-2010 11:38 PM

Apart from the Flanges the back box was ok if a little rusty in places.

I could probably nurse another year out of it but have decided to just replace it as it's off the car.

I will probably go down the route of sourcing clamps to do the job of the flanges unless i can work out a way to get a replacement flange over the flared end of the system.

Work in progress :hahaha: :whistle:

mole 27-04-2010 07:49 AM

Got any pics of your flared ends? :whistle:

rstoughy 27-04-2010 08:13 AM

Quote:

Originally Posted by mole (Post 51778)
Got any pics of your flared ends? :whistle:

No but can take some tonight if you want??

mole 27-04-2010 08:52 AM

Wouldn't mind Paul as never seen it all, just read stuff on here. :thumbs:

rstoughy 27-04-2010 06:19 PM

Just ordered up all the bolts, seal rings and a couple of flanges from the local steelers (all in stock except 1 flange) £31 inc VAT. :thumbs: :thumbs:

Am in total shock at something actually being reasonably priced :hahaha: :hahaha: :hahaha:

rstoughy 27-04-2010 06:46 PM

Rich,

Here are some pics of the pipes.

http://img.photobucket.com/albums/v4...L/DSC_2382.jpg

http://img.photobucket.com/albums/v4...L/DSC_2384.jpg

http://img.photobucket.com/albums/v4...L/DSC_2385.jpg

http://img.photobucket.com/albums/v4...L/DSC_2387.jpg

http://img.photobucket.com/albums/v4...L/DSC_2388.jpg

http://img.photobucket.com/albums/v4...L/DSC_2389.jpg

Mark CSL 27-04-2010 07:30 PM

when the car is under warranty and the flange rot or brake the backbox is replaced free as you cant get the flange for the flared end

Kev.H 27-04-2010 07:40 PM

theres nothing like a nice new flange :bigcry::bigcry: sorry couldnt resist :hahaha:


All times are GMT +1. The time now is 08:00 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c)www.wickedwifi.co.uk