Eibach/spc Rear camber control arms adjustible
 

Guys couple people been asking me about alternatives to the csl ally rear camber control arms as they are soft and bend easily bmw no longer stock these so ive found a deal that works quiet well
They are eibach all aluminium lightweight rear adjustible camer arms for rear suspension excellent quality £280 posted per kit
http://ca-int.co.uk/variants-Y2FyX21...kPTE4MDQ=.html
Attachment 9837

I must remember to learn how to adjust mine

If you get the camber spirit level tool then you just slide under the car loosen the two 27mm nuts then turn the centre rod in or out depending on what adjustment you want.
Or if you put it on a geo machine read out what the setting is then count the turns till you reach the other setting and write it down.problem is this puts the toe out a bit because you only adjust the back of the wheel not the front.

Does give infinate adjustment over stock if you have coilovers and the rest set up
Attachment 9838

Simpons just gave me 1 turn = 1/2 degree....just can't bloody loosen the nut :)

I have I think the rogue ones whereas Oneill has the Turner ones....Turner much better they are, very light like the CSL ones which is good.

Turners and rogue look almost identical shimmy.24mm bolt looks like
Buy a long spanner so you can get leverage on it
Attachment 9839

Attachment 9840
Rogue
I cant find proof on the eibach set but i think they are 3.00kg
And the rogue/turners are 2.26kg

In that case mine aren't Rogue they are Eibach, they look likes your CA ones...but The Turner ones are much lighter.

Stunner ones?lol your f#%¥ing with me now!!

:-D

Sorry "turner"

http://www.turnermotorsport.com/p-35...reettrack.aspx
Messed up! 5lbs the turners weigh sorry folks