CSL Register

CSL Register (http://www.cslregister.com/forum/index.php)
-   Parts For Sale (http://www.cslregister.com/forum/forumdisplay.php?f=10)
-   -   E46 M3 / CSL Genuine Brembo GT 4 Pot 355mm Front Brake Kit - Girodisc & RS2-9 (http://www.cslregister.com/forum/showthread.php?t=15178)

phoenixcsl 14-02-2019 08:52 AM

E46 M3 / CSL Genuine Brembo GT 4 Pot 355mm Front Brake Kit - Girodisc & RS2-9
 
For Sale:

E46 M3 Genuine Brembo Gran Turismo 4 Pot 355mm Front Big Brake Kit

Included:
· Genuine Brembo GT 4 Pot Calipers – Caliper Family F40
· Finished in Brembo GT Yellow with Black Brembo Decals
· Genuine Brembo GT Caliper Mounting Brackets
· Genuine Brembo Bells
· Brand New Girodisc Slotted Rotors 355 x 32 x 54mm
· Brand New Pagid RS2-9 Brake Pads
· Brand New Braided Hoses
· Orignal Brembo Boxes

Spare Parts:
· Genuine Brembo 44mm Piston Seals x 2
· Genuine Brembo 40mm Piston Seals x 2

Brembo GT Part No: 1B2.8015A

For sale is my genuine Brembo GT Front Big Brake Kit, this is the official Brembo Big Brake kit and not to be confused with the Porsche conversion or the BMW Performance Kit.

The calipers have been on my CSL and covered a maximum of 6k miles in the time I’ve owned them, they have literally come back from a complete strip, rebuild, cast smoothing and high end re-paint, the paint comes with a lifetime paint warranty.

The kit is 100% complete, everything comes with the original Brembo boxes (bit tatty), ready to bolt onto the car.

I have replaced the Brembo rotors with the Girodisc upgraded rotors (which I use on my GT3), also fitted a brand new set of Pagid RS2-9, the disc and pads have literally had a light bedding in session so have covered a maximum of 100 road miles.

Being a bit weird I like to have spare parts just in-case something goes wrong, so I have spare Genuine Brembo Dust and Piston seals, which I’ll include in the sale.

With the rear 4 pot GT kit, I will say it is one of the most balanced braking systems I’ve used, I personally prefer it over the AP setup which I had before, I am only selling these as I changed to the Brembo Monobloc 6 Piston Calipers on the car to try out.

These will fit under 18” wheels, a spacer may be required, I ran them with my OEM CSL wheels with a 12mm spacer, see attached caliper clearance PDF which is from Brembo for these brakes.

The cost of these kits new are astronomic, the Brembo GT kits are one of the best available for the E46 M3, especially one as sorted as this kit:

Current Prices: Brand New Brembo GT Kit - £3850, Girodisc Replacement Rotors - £500, Pagid RS2-9 - £400, Spare Dust Seals - £150, Caliper Rebuild and Paint £400

Asking price is £2250 collected from Surrey
Cash on collection, bank transfer or PayPal Friends and Family.

All Important Picutures:
https://photos.app.goo.gl/9rYhdX7xkUJvcZ43A


All times are GMT +1. The time now is 05:44 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c)www.wickedwifi.co.uk