CSL Register

CSL Register (http://www.cslregister.com/forum/index.php)
-   Parts For Sale (http://www.cslregister.com/forum/forumdisplay.php?f=10)
-   -   Stoptech big brake kit (http://www.cslregister.com/forum/showthread.php?t=5032)

scott7 15-08-2010 04:49 PM

Stoptech big brake kit
 
St 60 front kit and st 40 rear kit, huge six piston front calipers and large four piston rears, complete with 355mm two piece disks front and rear, full kit complete with all mounting brackets, braided brake lines and instructions in original boxes.This kit has only been fitted to the car for a few thousand road miles and is in excellent condition, check www.stoptech.com for more information, this kit retails at just under six thousand pounds, so is a bargain for £3000.http://i590.photobucket.com/albums/s...l/DSC01174.jpghttp://i590.photobucket.com/albums/s...l/DSC00430.jpghttp://i590.photobucket.com/albums/s...l/DSC00429.jpg

DaveD 19-08-2010 01:46 PM

What colour are the calipers and would you sell the rears separate if you got a buyer for the fronts?

Dan 19-08-2010 02:00 PM

Quote:

Originally Posted by DaveD (Post 63659)
What colour are the calipers and would you sell the rears separate if you got a buyer for the fronts?

Judging by the above pictures I would think that the colour is RED! :bigcry: :bigcry: :hahaha: :hahaha:

TANKSLAPPER 19-08-2010 02:21 PM

How does the handbrake shoe's work if all the disc's have the same bells ?

scott7 19-08-2010 04:06 PM

All the disks don't have the same bells, the rears are the same as the oem rears so the handbrake works the same, this is a direct replacement kit specifically for a csl, its balanced front and rear by the size of the pistons in the calipers, no i wont sell front and rear seperatley.

DaveD 19-08-2010 10:25 PM

Quote:

Originally Posted by Dan (Post 63660)
Judging by the above pictures I would think that the colour is RED! :bigcry: :bigcry: :hahaha: :hahaha:

Doh, i was looking at this in work earlier, they block all images from photobucket so i couldn't see them :hahaha:

Quote:

Originally Posted by scott7 (Post 63670)
All the disks don't have the same bells, the rears are the same as the oem rears so the handbrake works the same, this is a direct replacement kit specifically for a csl, its balanced front and rear by the size of the pistons in the calipers, no i wont sell front and rear seperatley.

What price are you looking for the whole kit? Assume this kit will fit a regular M3?

Any pads with them?

funtime 20-08-2010 07:19 PM

I would also like to know how much you want for the kit... very interested

CT1 02-09-2010 10:04 AM

Do you have to run spacers with these and will they fit 18inch wheels?

scott7 02-09-2010 09:23 PM

Not sure about wether this kit will fit under eighteens, front calipers are enormous, drop stop tech technical an e mail with any questions you have, they are very helpful, I had a slight squeak on the fronts, I contacted them and they sent me a set of shims foc, from the states.

scott7 07-10-2010 08:35 PM

bargain big brake kit.
 
Will take £2500.00 for this kit.

mattywhitt 17-10-2010 02:49 PM

Are pads included? Would these fit a regular E46 M3?

scott7 17-10-2010 03:01 PM

Pads are almost like new and as far as i know yes it will fit a normal m3.

billy-m3cutters 17-10-2010 07:57 PM

One hel of a kit.

s.mac 17-10-2010 08:17 PM

http://serve.mysmiley.net/mad/mad0066.gif

one of those moments when you http://serve.mysmiley.net/mad/mad0066.gif

not you Billy but 2 nd hand brake kit and M3 cutters seen on same thread sort of gets my blood boiling http://serve.mysmiley.net/mad/mad0066.gifhttp://serve.mysmiley.net/mad/mad0066.gifhttp://serve.mysmiley.net/mad/mad0066.gifhttp://serve.mysmiley.net/mad/mad0066.gifhttp://serve.mysmiley.net/mad/mad0066.gif

mattywhitt 17-10-2010 08:52 PM

S mac, is that a go at me? Have i done something wrong?

shimmy 17-10-2010 09:06 PM

You're too posh :)

s.mac 17-10-2010 09:10 PM

Quote:

S mac, is that a go at me? Have i done something wrong?
No :) unless you have changed your user name and you are the tw-t that sold me a set of fu- -cked AP brakes from m3 cutters, which I'm sure you're not :)
it gets my blood pressure going up at the thought of the shit I went through to get them fit enough to use and not to mention the cost :banghead:
the tw=-t said he would reimburse me, he fu--cked me off and never re appeared on m3 cutters. Shame he lived in Aberdeen, a bit too far for a knock on the door .....

s.mac 17-10-2010 09:11 PM

Quote:

You're too posh :)
__________________
:)

mattywhitt 17-10-2010 09:16 PM

Oh right, i understand, i just searched your name on m3cutters, thought you were sorting this out via txt? I take it you got no money back?

s.mac 17-10-2010 10:06 PM

Quote:

Oh right, i understand, i just searched your name on m3cutters, thought you were sorting this out via txt? I take it you got no money back?
he was full of shit, he said he would sort me out when I put it on the open forum, in the end his new kitchen took preference :wanker:

s.mac 17-10-2010 10:08 PM

sorry Scott:)

For sale Scott,s BBK :smt023

Bounce 17-10-2010 10:15 PM

Calm down Steve,its nearly bed time and you will have trouble sleeping.;)

s.mac 17-10-2010 10:22 PM

Quote:

Calm down Steve,its nearly bed time and you will have trouble sleeping.;)
:finga:

LOL :hahaha:

billy-m3cutters 18-10-2010 08:28 AM

Sori to hear your still put off by m3cutters because of Martin_25th(sellers username)

S.mac - he still lives in Aberdeen and drives s HGV lorry.

It's really bad of him not to re-imburse you some cash even tho he promised he will.

Hope you come back to the site and leave this terrible individual in the past as a bad memory.

Regards


Billy

s.mac 18-10-2010 04:40 PM

cheers Billy :)

scott7 14-12-2010 07:46 PM

Now sold.


All times are GMT +1. The time now is 05:22 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
(c)www.wickedwifi.co.uk