CSL Register - Square 265/35x18

Page 2 of 2

Show 40 post(s) from this thread on one page

CSL Register (http://www.cslregister.com/forum/index.php)

- Technical Area (http://www.cslregister.com/forum/forumdisplay.php?f=16)

- - Square 265/35x18 (http://www.cslregister.com/forum/showthread.php?t=11891)

Equinox

20-03-2014 11:21 PM

Cool thanks for your help

shane@mbtech

20-03-2014 11:39 PM

You will likely need 10mm rear spacer to even up the arch gaps.

Equinox

21-03-2014 08:42 PM

I run a 12mm front and rear at the moment so ill see how I go when I get some wheels sorted, cheers

mattCSLnut

22-03-2014 12:10 AM

2 Attachment(s)

Quote:

Originally Posted by Equinox (Post 165712)

I run a 12mm front and rear at the moment so ill see how I go when I get some wheels sorted, cheers

You wont need any spacers @ the front with 9J OEM 18's square set up but they (12 mm spacers) do help to tidy up & fill the rear arches well :thumbs:
Couple of pix below of mine with the square 9J OEM 18's with 12 mm spacers @ the back :smokin:

Equinox

22-03-2014 08:16 AM

Looks great, I assume your running 265/35's too ?

shane@mbtech

22-03-2014 09:02 AM

Look like direzza 265 35 18 on matts pics there.

mattCSLnut

22-03-2014 10:37 AM

Quote:

Originally Posted by Equinox (Post 165738)

Looks great, I assume your running 265/35's too ?

I was running 265/35/18 DUNLOP DZ02s all round :smokin: Great tyre BTW :supz: if a little expensive. I've now reverted back to OEM CSL 19's with full Phat CUPs :smt055 as I couldn't stomach the purchase prise of New set of DZ03s @ almost £1500 :(

All times are GMT +1. The time now is 02:33 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page