Hello to all from italy !!!!

[ALE-M3CS]

Hello to all boys !!!!!
I write from Mantova , Lombardy . I am a happy owner of a e46 m3 CS . Before I had a e46 m3 INDIVIDUAL SMG , then I sold it because with a little girl coming I sold it . Now that my daughter is grown up I returned to M. I tried desperately CSL held well in Italy .
During the winter I plan some changes :bigcry::bigcry:. The car stock is 100 % , the only thing installed by the previous owner AP kit complete front and rear . I apologize in advance if I posted in the wrong trend . I have just a moment place a couple of photos of the current and previous m3 . What website do you recommend to upload photos ?

[alexk]

Hi welcome to the forum !

[glendog74]

Welcome! :thumbs:

[Mike R]

Hello and welcome - I use Photobucket which seems to work well on here :).

[ALE-M3CS]

http://i1383.photobucket.com/albums/ah313/aler681/014sga_zpsd23qftby.jpg (http://s1383.photobucket.com/user/aler681/media/014sga_zpsd23qftby.jpg.html)

[ALE-M3CS]

http://i1383.photobucket.com/albums/ah313/aler681/DSC_0216_zpseg5i3fgu.jpg (http://s1383.photobucket.com/user/aler681/media/DSC_0216_zpseg5i3fgu.jpg.html)

[ALE-M3CS]

thanks guys banvenuto . I have posted pictures of my first M3.

[ALE-M3CS]

and now this is my present

http://i1383.photobucket.com/albums/ah313/aler681/IMG_0947_zpskadut3w2.jpg (http://s1383.photobucket.com/user/aler681/media/IMG_0947_zpskadut3w2.jpg.html)

http://i1383.photobucket.com/albums/ah313/aler681/IMG_0948_zpsm6fjzi7u.jpg (http://s1383.photobucket.com/user/aler681/media/IMG_0948_zpsm6fjzi7u.jpg.html)

car whit 65000 km.

[ALE-M3CS]

for now , I gave a abule carbon CSL and also the front bumper CSL . I hope c he send me the faithful replica , the bar door without license plate lights . I asked the official BMW dealer in my area but I was told that to get the spare parts of a CSL must have the chassis number of a true CSL would not otherwise give . If the trunk that I will not be just resell it and try again . Maybe here on your forum I find one for sale .

[Clubber]

Welcome to the forum. Love the extended cinnamon leather on your old M3 !

[glendog74]

Love the extended cinnamon leather on your old M3 !

+1 :thumbs:

[CraigMillwardCroft]

Welcome to the mad house :thumbs:

[alexk]

I like the M3 CS you have.

[ALE-M3CS]

hello guys, thanks for the compliments. I really loved the interior of my previous M3. I need your advice and also a aiuto.Oggi I received the CSL trunk and also the front bumper. I bought them both to carbonfiber dynamics in Germany. The trunk is made of fiberglass and is not done very well, the front bumper instead seems genuine parts. I ask your help to solve the problem of cooling the front brakes. On my system I installed an AP RACING full of disks and calipers. For the system to cool on the side of the guide use the round hole of the bumper CSL but to cool the passenger side was thinking of using a flexible tube that starts from the middle rack of the bumper and ends up in the hole that is already standard in the passaruota.Qualcuno of you have already done this kind of work? There are kits on the market already made to solve the problem? Thank you in advance

[ALE-M3CS]

http://i1383.photobucket.com/albums/ah313/aler681/IMG_2256_zpsnmjms3i1.jpg (http://s1383.photobucket.com/user/aler681/media/IMG_2256_zpsnmjms3i1.jpg.html)


http://i1383.photobucket.com/albums/ah313/aler681/IMG_2261_zpsuuoviqfs.jpg (http://s1383.photobucket.com/user/aler681/media/IMG_2261_zpsuuoviqfs.jpg.html)

The inner hole near the wheel is the one that receives the air entering from the conduit near the fog lamp on the front bumper .

[Loaded]

Welcome!

Your black M3 was great. CS is better!

Enjoy it in good health.

:)

[Mike R]

Had you not said your bumper was a genuine one, I would have suggested adding an additional hole on the other side to make it symmetrical like the G-power car:

http://img.photobucket.com/albums/0703/MikeR/CSL%20stuff/Gpower%20CSL_zpsawfz6pfv.jpg (http://smg.photobucket.com/user/MikeR/media/CSL%20stuff/Gpower%20CSL_zpsawfz6pfv.jpg.html)

[ALE-M3CS]

I had considered as a solution but I do not like the front bumper with the two holes. in this photo of the g-power would solve the problem well, but I do not like

[Mike R]

How about making something up that fits on the back of the single hole that divides the hole into two (cutting two suitably sized plastic 90° elbows in half and fusing them together) and then run some ducting to each brake disc from that?

[ALE-M3CS]

I did not think about it. good idea. thank you!!!!.

[ALE-M3CS]

you guys. front bumper original dismantled. very quick and easy as operation.

[Mike R]

you guys. front bumper original dismantled. very quick and easy as operation.

This post is useless without photos ;).

[ALE-M3CS]

you are right but are still in the work because I can not mount the front bumper that I bought, is done very male.La best solution it is to manage to find the VIN number of a true CSL to get hold of the original front bumper or buy a used one

[gazzzar]

Nice car mio amico! Just to know - I have an immaculate replica of CSL interior central carbon console....for sale (very rare part LHD) ;)

[ALE-M3CS]

Hello guys. finally after a long search I could not find a frame number of a CSL who lives in Italy. Now the question becomes much more semplice.Ho reloam looked on and saw a strange thing. I try as spare parts the front seats to me indicates that they are finished, you think you might have ended as spare parts?